Genuine Sinotruk HOWO Engine Oil Filter VG61000070005 for WD615 & WD12 Engines

The VG61000070005 Engine Oil Filter is the first line of defense for your Sinotruk HOWO truck. In the demanding environment of heavy-duty transport, contaminants like carbon deposits and metal wear particles can compromise engine integrity. As a critical part of the Sinotruk spare parts ecosystem, this filter is built with high-efficiency synthetic blend media to capture 99% of harmful contaminants while maintaining optimal oil pressure even in extreme cold or high-heat operations.

Technical Specifications:

• Part Name: Spin-on Oil Filter

• Part Number: VG61000070005 (Alternative: VG61000070005/1)

• Primary Application: Sinotruk HOWO, Steyr, Prince, Hohan

• Engine Compatibility: WD615, WD12, D10, D12 Series

• Filtration Efficiency: 25 microns (Nominal)

• Thread Size: 1 1/8-16 UN

• Outer Diameter: 108 mm

• Height: 210 mm

• Gasket Material: High-temp Nitrile Rubber (Buna-N)

Professional Installation Guide:

1. Preparation: Before removing the old filter, clean the area around the filter head to prevent dirt from entering the oil gallery.

2. Pre-Lubrication: Apply a thin film of clean engine oil to the rubber gasket of the new VG61000070005 filter. This ensures a proper seal and prevents the gasket from bunching or tearing during tightening.

3. Hand Tighten Only: Spin the filter on until the gasket contacts the base. Tighten an additional 3/4 to 1 full turn. Do not use a filter wrench for tightening, as over-torquing can damage the seal or thread.

4. Initial Start-up: After installation, start the engine and let it idle for 3-5 minutes. Check the base of the filter for any signs of seepage.

5. Level Check: Shut off the engine, wait 5 minutes for the oil to settle, and check the dipstick. Top up if necessary to account for the volume held within the new filter.